The LMU-1230 is a full-featured vehicle tracking product designed for easy and reliable installation in automobiles. The LMU-1230 is an ideal solution for basic fleet, automotive insurance, stolen vehicle, vehicle finance, auto rental and other vehicle track and trace applications where an internal back-up battery is required.

The LMU-1230 high-value tracking unit from CalAmp features a small size with superior GPS performance, an optional internal 200 mAh or 1000 mAh back-up battery, 3-axis accelerometer for motion and tilt sense, ultra low sleep modes, and four Inputs/Outputs (I/O). The LMU-1230 is a complete vehicle tracking and communications device incorporating next-generation, super-sensitive GPS technology on GSM/GPRS/HSPA/CDMA 1xRTT cellular networks for installation in any 12 or 24 volt vehicle. Superior internal antennas for both cellular and GPS eliminate the need for wired antennas and make the LMU-1230 mountable virtually anywhere in the vehicle for easy, inexpensive installations. Messages are transported across the cellular network using SMS or UDP messaging providing a reliable communications link between the device and your application servers. The LMU-1230 is designed to dramatically reduce cost, power and size while providing excellent reliability.

Flexibility

The LMU-1230 employs CalAmp’s advanced industry leading on-board alert engine, PEG™ (Programmable Event Generator) to monitor external conditions and support customer-defined exception-based rules to meet your application requirements. PEG monitors the vehicle environment and responds instantaneously to pre-defined threshold conditions related to time, date, motion, location, geo-zone, input and other event combinations. This behavior can be programmed by CalAmp before shipment, at a customer’s facility, or over-the-air once the unit has been fielded.

Over-the-Air Serviceability

The LMU-1230 leverages CalAmp’s management and maintenance system, PULS™ (Programming, Updates, and Logistics System), for over-the-air configuration parameters, PEG rules, and firmware. The LMU-1230 offers out-of-the-box hands free configuration and automatic post-installation upgrades that can monitor unit health status across your customers’ fleets and identify issues before they become expensive problems.

View All Devices
  • Specs
  • Features
  • Have Questions?

Specifications

Manufacturer Calamp
Dimensions2.125 x 3.5 x 0.93”, (54 x 89 x 24mm)
Weight2.9 oz, (82 g)
Power Supply<2mA @ 12/24 VDC (deep sleep)
<20mA @ 12/24 VDC (radio-active sleep)
<25mA @ 12/24 VDC (idle IP connection open)
<115mA @ 12/24 VDC (continuous transmit)
CertificationsPTCRB, FCC, Industry Canada, CE
Operating Temperatures-30° to + 75° C (connected to primary power)
-40° to + 85° C (storage)
MountingStandard tie-wrap or adhesive; Screw mount bracket
CommunicationsGPRS/EDGE/HSPA CDMA 1xRTT packet data, UDP and SMS
Number of InputsDigital: 4 fixed bias/ programmable bias
Analog: 1 External ADC input (with 20 pin Molex configuration)
1 Internal VCC monitor
ConnectionCaptive 8 wire harness
Humidity95% R.H. @ 50° C non-condensing
  • GPRS/EDGE/HSPA and CDMA 1xRTT packet data, UDP and SMS
  • Internal or external cellular and GPS antennas
  • Super-sensitive GPS (-168dBm)
  • Optional Internal back-up 200 mAh or 1000mAh battery
  • Ultra-low power sleep mode (<2mA)
  • 3-axis accelerometer for motion sense and tilt
  • Up to 4 inputs and 4 outputs
  • Voltage monitoring and low battery notification
  • 2,000 buffered messages
  • 10 Built-in geo-fences
  • PEG™ Exception-Based Rules
  • Automatic, Over-The-Air Unit Configuration on Power-up (PULS™)
  • Over-The-Air Firmware Download (PULS™)
  • Web-Based Device Management (PULS™)
  • Optional starter interrupt harness
  • Optional ODBII easy install harness
  • Optional external and internal GPS and cellular antennas
  • Optional external backup battery
  • Optional serial cable

Please fill out the following form to receive more information from Numerex.